What is the Power Factor?
All induction loads require two kind of power, one is KVAR referred to as reactive power, and the other is KW referred to as working power. The combination of KVAR and KW make up KVA, which refers to apparent power.
Induction loads require KVAR to establish EMF or electromagnetic field around the induction windings. The EMF provides the torque necessary to turn the motor shaft. Without KVAR the motor would not run.
The power factor value represents the effectively electrical power consumed (a higher power factor represent more effective use of the electrical consumption).
Equipment that use power, consume both Active (working) load and Reactive (non-working) load.
- The Active power performs the useful work.
- The Reactive power’s only function is to develop magnetic fields due to inductive load.
- KAVAR technology reduces the reactive load without effecting the EMF.
Why Improve Power Factor?
Lower Power Factor means poor electrical efficiency. By implementing the KVAR technology (or custom size KVAR units) to individual induction loads, we are providing the alternative KVAR for each motor and therefore the power used from the electricity provider is mostly KW.This results in:
- Use of smaller Generators
- Use of smaller Transformers
- Use of smaller Isolators /Panels/ Cables
- Lower electricity bill
- Reduction of C02 discharge
